How to Use and Upgrade to GM Gen III LS-Series Powertrain Control Systems

Author: Mike Noonan
Publisher: CarTech Inc
ISBN: 161325055X
Category : Technology & Engineering
Languages : en
Pages : 146

Book Description
The General Motors G-Body is one of the manufacturer's most popular chassis, and includes cars such as Chevrolet Malibu, Monte Carlo, and El Camino; the Buick Regal, Grand National, and GNX; the Oldsmobile Cutlass Supreme; the Pontiac Grand Prix, and more. This traditional and affordable front engine/rear-wheel-drive design lends itself to common upgrades and modifications for a wide range of high-performance applications, from drag racing to road racing. Many of the vehicles GM produced using this chassis were powered by V-8 engines, and others had popular turbocharged V-6 configurations. Some of the special-edition vehicles were outfitted with exclusive performance upgrades, which can be easily adapted to other G-Body vehicles. Knowing which vehicles were equipped with which options, and how to best incorporate all the best-possible equipment is thoroughly covered in this book. A solid collection of upgrades including brakes, suspension, and the installation of GMs most popular modern engine-the LS-Series V-8-are all covered in great detail. The aftermarket support for this chassis is huge, and the interchangeability and affordability are a big reason for its popularity. It's the last mass-produced V-8/rear-drive chassis that enthusiasts can afford and readily modify. There is also great information for use when shopping for a G-Body, including what areas to be aware of or check for possible corrosion, what options to look for and what should be avoided. No other book on the performance aspects of a GM G-Body has been published until now, and this book will serve as the bible to G-Body enthusiasts for years to come.

LS Gen III Engine Wiring Systems: 1997-2007

Author: Mike Noonan
Publisher: CarTech Inc
ISBN: 1613257015
Category : Transportation
Languages : en
Pages : 192

Book Description
Automotive enthusiasts who have followed hot-rodding trends over the last decade know that GM’s LS-series engine is the most popular swap on the market. Similar to the first-generation small-block Chevy engines that were swapped into Model A Fords back in the day, these swaps are arguably just as popular. While kits and the aftermarket help with the logistics and the placement of hardware (such as motor mounts, oil pans, and headers), the area that still remains a mystery to most is how to wire and electronically control your swapped LS project. In LS Gen III Engine Wiring Systems, expert Mike Noonan helps demystify the entire complicated process. Extensively covered are terms and tools of the trade, advice on quality connections, detailed coverage of all the engine control modules offered, drive-by-wire systems, harness connectors, and cruise-control systems. Also covered in depth are air-conditioning systems, cooling-system fan operation, transmission interfaces and connectivity, and control-module programming (tuning) for standalone operation. Featuring wiring diagrams and computer-aided design (CAD) and computer-aided manufacturing (CAM) artwork as well as an appendix with real-world projects and examples, this guide covers all the bases. Whether you are performing a simple swap that utilizes only the basics, a more complex project with all the bells and whistles, or simply want a working knowledge of how these systems work, this guide will be a valuable resource for years to come.

GM LS-Series Engines

Author: Joseph Potak
Publisher: Motorbooks International
ISBN: 0760376549
Category : Technology & Engineering
Languages : en
Pages : 226

Book Description
GM LS-Series Engines: The Complete Swap Guide, 2nd Edition is the updated, ultimate guide to installing General Motors' LS V-8 in your muscle car, hot rod, racer, or just about any project car.

How to Supercharge & Turbocharge GM LS-Series Engines - Revised Edition

Author: Barry Kluczyk
Publisher: CarTech Inc
ISBN: 1613254903
Category : Transportation
Languages : en
Pages : 145

Book Description
GM LS-series engines are some of the most powerful, versatile, and popular V-8 engines ever produced. They deliver exceptional torque and abundant horsepower, are in ample supply, and have a massive range of aftermarket parts available. Some of the LS engines produce about 1 horsepower per cubic inch in stock form--that's serious performance. One of the most common ways to produce even more horsepower is through forced air induction--supercharging or turbocharging. Right-sized superchargers and turbochargers and relatively easy tuning have grown to make supercharging or turbocharging an LS-powered vehicle a comparatively simple yet highly effective method of generating a dramatic increase in power. In the revised edition of How to Supercharge & Turbocharge GM LS-Series Engines, supercharger and turbocharger design and operation are covered in detail, so the reader has a solid understanding of each system and can select the best system for his or her budget, engine, and application. The attributes of Roots-type and centrifugal-type superchargers as well as turbochargers are extensively discussed to establish a solid base of knowledge. Benefits and drawbacks of each system as well as the impact of systems on the vehicle are explained. Also covered in detail are the installation challenges, necessary tools, and the time required to do the job. Once the system has been installed, the book covers tuning, maintenance, and how to avoid detonation so the engine stays healthy. Cathedral, square, and D-shaped port design heads are explained in terms of performance, as well as strength and reliability of the rotating assembly, block, and other components. Finally, Kluczyk explains how to adjust the electronic management system to accommodate a supercharger or turbocharger. How to Supercharge and Turbocharge GM LS-Series Engines is the only book on the market specifically dedicated to forced air induction for LS-series engines. It provides exceptional guidance on the wide range of systems and kits available for arguably the most popular modern V-8 on the market today.

How to Build and Modify GM LS-Series Engines

Author: Joseph Potak
Publisher: Motorbooks
ISBN: 1616730935
Category : Transportation
Languages : en
Pages : 176

Book Description
For gearheads who want to build or modify popular LS engines, How to Build and Modify GM LS-Series Engines provides the most detailed and extensive instructions ever offered for those modding LS engines through the Gen IV models. The LS1 engine shook the performance world when introduced in the 1997 Corvette. Today the LS9 version far eclipses even the mightiest big-blocks from the muscle car era, and it does so while meeting modern emissions requirements and delivering respectable fuel economy. Premier LS engine technician Joseph Potak addresses every question that might come up: Block selection and modifications Crankshaft and piston assemblies Cylinder heads, camshafts, and valvetrain Intake manifolds and fuel system Header selection Setting up ring and bearing clearances for specific uses Potak also guides readers through forced induction and nitrous oxide applications. In addition, the book is fully illustrated with color photography and detailed captions to further guide readers through the mods described, from initial steps to final assembly. Whatever the reader’s performance goals,How to Build and Modify GM LS-Series Engines will guide readers through the necessary modifications and how to make them. It’s the ultimate resource for building the ultimate LS-series engine! The Motorbooks Workshop series covers topics that engage and interest car and motorcycle enthusiasts. Written by subject-matter experts and illustrated with step-by-step and how-it’s-done reference images, Motorbooks Workshop is the ultimate resource for how-to know-how.

GM LS-Series Engines

Author: Joseph Potak
Publisher: Quarto Publishing Group USA
ISBN: 1610602005
Category : Transportation
Languages : en
Pages : 193

Book Description
In this illustrated guide, an LS-series expert takes you step-by-step through the process of installing GM’s high-power engines in any automobile. First underhood in the 1997 Corvette, GM’s LS engines have proven powerful, reliable, and amazingly fuel efficient. Since that time, more than a dozen variants have been produced, ranging from bulletproof, iron-block 4.8-liter workhorses to the supercharged 7.0-liter LS7. Among performance enthusiasts, these remarkable V-8 engines have become a favorite for engine swaps, owing to their fantastic power, compact design, and modification possibilities. In GM LS-Series Engines: The Complete Swap Manual, professional LS-series engine specialist and technician Joseph Potak details all the considerations involved in performing this swap into any vehicle. With clear instructions, color photos, diagrams, and specification tables, Potak guides you through: Mounting your new engine Configuring the EFI system Designing fuel and exhaust systems Sourcing the correct accessories for your application Transmission, torque converters, and clutches Performance upgrades and power-adders Troubleshooting, should problems arise

LS Swaps

Author: Jefferson Bryant
Publisher: CarTech Inc
ISBN: 1613250932
Category : Transportation
Languages : en
Pages : 146

Book Description
Introduced in 1997, the GM LS engine has become the dominant V-8 engine in GM vehicles and a top-selling high-performance crate engine. GM has released a wide range of Gen III and IV LS engines that deliver spectacular efficiency and performance. These compact, lightweight, cutting-edge pushrod V-8 engines have become affordable and readily obtainable from a variety of sources. In the process, the LS engine has become the most popular V-8 engine to swap into many American and foreign muscle cars, sports cars, trucks, and passenger cars. To select the best engine for an LS engine swap, you need to carefully consider the application. Veteran author and LS engine swap master Jefferson Bryant reveals all the criteria to consider when choosing an LS engine for a swap project. You are guided through selecting or fabricating motor mounts for the project. Positioning the LS engine in the engine compartment and packaging its equipment is a crucial part of the swap process, which is comprehensively covered. As part of the installation, you need to choose a transmission crossmember that fits the engine and vehicle as well as selecting an oil pan that has the correct profile for the crossmember with adequate ground clearance. Often the brake booster, steering shaft, accessory pulleys, and the exhaust system present clearance challenges, so this book offers you the best options and solutions. In addition, adapting the computer-control system to the wiring harness and vehicle is a crucial aspect for completing the installation, which is thoroughly detailed. As an all-new edition of the original top-selling title, LS Swaps: How to Swap GM LS Engines into Almost Anything covers the right way to do a spectrum of swaps. So, pick up this guide, select your ride, and get started on your next exciting project.

Engine Management

Author: Greg Banish
Publisher: CarTech Inc
ISBN: 1932494421
Category : Technology & Engineering
Languages : en
Pages : 66

Book Description
Tuning engines can be a mysterious art, all engines need a precise balance of fuel, air, and timing in order to reach their true performance potential. Engine Management: Advanced Tuning takes engine-tuning techniques to the next level, explaining how the EFI system determines engine operation and how the calibrator can change the controlling parameters to optimize actual engine performance. It is the most advanced book on the market, a must-have for tuners and calibrators and a valuable resource for anyone who wants to make horsepower with a fuel-injected, electronically controlled engine.

How to Build High-Performance Chevy LS1/LS6 V-8s

Author: Will Handzel
Publisher: CarTech Inc
ISBN: 193249488X
Category : Technology & Engineering
Languages : en
Pages : 161

Book Description
This new color edition is essential for the enthusiast who wants to get the most performance out of this new engine design but is only familiar with the older Chevy small-blocks. Covered is everything you need to know about these engines, including the difficult engine removal and installation, simple engine bolt-ons, electronic controls for the Generation III engine, and detailed engine builds at four different power levels.

The Chevrolet Small-Block Bible

Author: Thomas J. Madigan
Publisher: Motorbooks
ISBN: 1610585488
Category : Transportation
Languages : en
Pages : 240

Book Description
Ever since its introduction in 1955, Chevroletâ€™s small-block V-8 has defined performance. It was the first lightweight, overhead-valve V-8 engine ever available to the masses at an affordable price and, better yet, had tremendous untapped performance potential, making it the performance engine of choice to this day. What sets the Chevy small-block further apart is the fact that a builder does not have to spend big money to get big horsepower numbers. Using multiple examples of engine builds and case studies, The Chevrolet Small-Block Bible provides the reader with the information needed to build anything for a mild street engine for use in a custom or daily driver to a cost-is-no-object dream build. Includes parts selection, blue printing, basic machine work, and more.