Ford 429/460 Engines

Author: Charles Morris
Publisher: CarTech Inc
ISBN: 161325492X
Category : Transportation
Languages : en
Pages : 145

Book Description
Ford was unique in that it had two very different big-block engine designs during the height of the muscle car era. The original FE engine design was pioneered in the late 1950s, primarily as a more powerful replacement for the dated Y-block design. What began as torquey engines meant to move heavyweight sedans morphed into screaming high-performance mills that won Le Mans and drag racing championships throughout the 1960s. By the late 1960s, the FE design was dated, so Ford replaced it with the 385 series, also known as the Lima design, in displacements of 429 and 460 ci, which was similar to the canted-valve Cleveland design being pioneered at the same time. It didn’t share the FE pedigree of racing success, mostly due to timing, but the new design was better in almost every way; it exists via Ford Motorsports’ offerings to this day. Beginning in 1971, the 429 found its way between the fenders of Mustangs and Torinos in high-compression 4-barrel versions called the Cobra Jet and Super Cobra Jet, and they were some of the most powerful passenger car engines Ford had ever built. If the muscle car era had not died out shortly after the release of these powerful engines, without a doubt the 429 performance variants would be ranked with the legendary big-blocks of all time. In this revised edition of How to Rebuild Big-Block Ford Engines, now titled Ford 429/460 Engines: How to Rebuild, Ford expert Charles Morris covers all the procedures, processes, and techniques for rebuilding your 385 Series big-block. Step-by-step text provides details for determining whether your engine actually needs a rebuild, preparation and removal, disassembly, inspection, cleaning, machining and parts selection, reassembly, start-up, and tuning. Also included is a chapter in building the special Boss 429 engines, as well as a bonus chapter on the Ford 351 Cleveland, Ford’s little brother to the big-block.

Ford FE Engines

Author: Barry Rabotnick
Publisher: CarTech Inc
ISBN: 1613252447
Category : Transportation
Languages : en
Pages : 145

Book Description
Ford FE engines, which were manufactured from the late 1950s all the way through the mid-1970s, were designated as the large-displacement engines in the Ford lineup. FE means Ford Edsel, and reflects an era when Ford sought to promote the Edsel name. The design of these engines was implemented to increase displacement over its predecessor, the Y-Block engines of the previous decade. Early models were fairly modest in displacement, as were most big-blocks of the era, but they grew quickly to fill the needs of rapidly changing chassis requirements and consumer demand for larger vehicles. As it grew, the FE engine performed admirably as a heavy passenger car and light truck engine. It also became quite accomplished in performance circles, winning the 24 Hours of Le Mans, as well as powering Ford’s muscle car and drag racing programs in the mid- to late 1960s. In this book, you will learn everything you need to know to rebuild one of these legendary engines. CarTech's unique Workbench series format takes you step-by-step through the entire rebuilding process. Covered are engine identification and selection, disassembly, cleaning, parts analysis and assessment, machine shop processes, replacement parts selection, re-assembly and start-up/break-in techniques. Along the way you find helpful tips on performance upgrades, trouble spots to look for, special tools required, and professional builder's tips. FE master, owner of Survival Motorsports, and veteran author Barry Rabotnick shares all of his tricks and secrets on building a durable and reliable FE engine. Whether you are simply rebuilding an old truck for reliable service use, restoring a 100-point show car, or building the foundation for a high-performance street and strip machine, this book will be an irreplaceable resource for all your future FE engine projects.

Ford 351 Cleveland Engines

Author: George Reid
Publisher: CarTech Inc
ISBN: 1613250487
Category : Transportation
Languages : en
Pages : 146

Book Description
Ford's 351 Cleveland was designed to be a "mid-sized" V-8 engine, and was developed for higher performance use upon its launch in late 1969 for the 1970 models. The Cleveland engine addressed the major shortcoming of the Windsor engines that preceded it, namely cylinder head air flow. The Windsor engines just couldn't be built at the time to compete effectively with the strongest GM and Mopar small-block offerings, and the Cleveland engine was the answer to that problem. Unfortunately, the Cleveland engine was introduced at the end of Detroit's muscle car era, and the engine, in pure Cleveland form, was very short lived. It did continue on as a low compression passenger car and truck engine in the form of the 351M and 400M, which in their day, offered little in the way of excitement. Renewed enthusiasm in this engine has spawned an influx of top-quality new components that make building or modifying these engines affordable. This new book reviews the history and variations of the 351 Cleveland and Ford's related engines, the 351M and 400M. Basic dimensions and specifications of each engine, along with tips for identifying both design differences and casting numbers are covered. In addition, each engine's strong points and areas of concern are described in detail. Written with high performance in mind, both traditional power tricks and methods to increase efficiency of these specific engines are shared. Also, example builds of 400-, 500-, and even 600-hp engines are highlighted, so you can model your build after any of these powerhouses, depending on your intended use. With the influx of aftermarket parts, especially excellent cylinder heads, the 351 Cleveland as well as the 351M and 400m cousins are now seen as great engines to build. This book will tell you everything you need to know to build a great street or competition engine based in the 351 Cleveland platform.

Ford Flathead Engines

Author: Michael Herman
Publisher: CarTech Inc
ISBN: 1613252870
Category : Transportation
Languages : en
Pages : 146

Book Description
Although not the first V-8 engine ever produced, Henry Ford's side-valve V-8, launched in 1932, certainly qualified as the first mass-produced V-8 sold to the public. Because of Henry Ford's stubbornness, the first versions were less than ideal. The technology was in its infancy and cost-cutting measures limited the output and reliability of the early models. Over time, however, the "Flattie" became the go-to powerplant for a whole generation of new hobbyists who were called "hot rodders." The engine maintained its position in the hobby well into the 1950s, even when more modern overhead-valve designs started coming out of Detroit. It's hard to overstate the impact that this simple little engine had on a whole generation of enthusiasts. Even today, people choose a flathead for period-correct builds over far more powerful options. The style and sound of a modified flathead is an iconic part of American history. In Ford Flathead Engines: How to Rebuild & Modify, veteran author Tony Thacker and flathead guru of H&H Flatheads, Mike Herman, take you step-by-step through rebuilding a vintage flathead. One of the most important steps is to actually find a good, usable core; many have been sitting for a very long time and the engine design is prone to cracking. Running changes are also an important consideration when selecting a core, and include cooling system, ignition, and transmission mount. After you have selected a core, Thacker and Herman take you through the entire process of a rebuild, including teardown, parts inspection, machine shop processes, replacement part selection, re-assembly, start up, and break-in. Also covered is a unique performance build completed at the H&H shop for legendary race car team manager and all-around enthusiast Ray Evernham. It all adds up to more than 500 color photos and insider tips on building what could be called the most iconic engine ever built, the Ford flathead V-8.

How to Rebuild the Small-Block Ford

Author: George Reid
Publisher: CarTech Inc
ISBN: 1932494898
Category : Technology & Engineering
Languages : en
Pages : 146

Book Description
This revised and updated color edition of How to Rebuild the Small-Block Ford walks you step by step through a rebuild, including: planning your rebuild, disassembly and inspection, choosing the right parts, machine work, assembling your engine, and first firing and break-in.

Ford Y-Block Engines: How to Rebuild & Modify

Author: Charles Morris
Publisher: CarTech Inc
ISBN: 1613250614
Category : Transportation
Languages : en
Pages : 138

Book Description
As Ford’s follow-up to the famous flathead, the Y-block was Ford’s first overhead-valve V-8 and it established an impressive high-performance legacy, winning many races in NASCAR and setting records at the Bonneville Salt Flats. This venerable Ford engine, which powers classic Thunderbirds, Crown Victorias, Edsels, and other cars, is enjoying a performance renaissance. Many aftermarket parts, including heads, can turn a sedate Y-block into a powerhouse. The engine earned its name from its deep-skirt block design that looked like a “Y.” This stout engine was installed in millions of Ford cars from 1954 to 1962 and Ford trucks from 1952 to 1964. Author and Ford tech expert Charles Morris explains each critical aspect of rebuilding a stock 239-, 256-, 272-, 292-, and 312-ci Y-block and building a modified Y-block. He shows you how to identify components and conduct a thorough inspection so you select a sound block, heads, intake, and other components. He explains the specifics for obtaining high-quality machining work and verifying clearances. In addition, he delves into the intricacies of each step of the assembly process so you can rebuild a strong-running and reliable engine. Most important, Morris details the steps to effectively remedy the Y-block oiling problems. This is the book Ford Y-block owners and fans have been waiting for. It’s an indispensible guide for performing a professional-caliber rebuild and buildup of the Y-block.

4.6L & 5.4L Ford Engines

Author: George Reid
Publisher: CarTech Inc
ISBN: 1613252285
Category : Transportation
Languages : en
Pages : 145

Book Description
Since 1991, the popular and highly modifiable Ford 4.6-liter has become a modern-day V-8 phenomenon, powering everything from Ford Mustangs to hand-built hot rods and the 5.4-liter has powered trucks, SUVs, the Shelby GT500, and more. The wildly popular 4.6-liter has created an industry unto itself with a huge supply of aftermarket high-performance parts, machine services, and accessories. Its design delivers exceptional potential, flexibility, and reliability. The 4.6-liter can be built to produce 300 hp up to 2,000 hp, and in turn, it has become a favorite among rebuilders, racers, and high-performance enthusiasts. 4.6-/5.4-Liter Ford Engines: How to Rebuild expertly guides you through each step of rebuilding a 4.6-liter as well as a 5.4-liter engine, providing essential information and insightful detail. This volume delivers the complete nuts-and-bolts rebuild story, so the enthusiast can professionally rebuild an engine at home and achieve the desired performance goals. In addition, it contains a retrospective of the engine family, essential identification information, and component differences between engines made at Romeo and Windsor factories for identifying your engine and selecting the right parts. It also covers how to properly plan a 4.6-/5.4-liter build-up and choose the best equipment for your engine's particular application. As with all Workbench Series books, this book is packed with detailed photos and comprehensive captions, where you are guided step by step through the disassembly, machine work, assembly, start-up, break-in, and tuning procedures for all iterations of the 4.6-/5.4-liter engines, including 2-valve and 3-valve SOHC and the 4-valve DOHC versions. It also includes an easy-to-reference spec chart and suppliers guide so you find the right equipment for your particular build up.

How to Build Max Performance Ford V-8s on a Budget

Author: George Reid
Publisher: CarTech Inc
ISBN: 1884089550
Category : Technology & Engineering
Languages : en
Pages : 130

Book Description
This revved up volume addresses high-performance engines, such as the ones found in Mustangs and emphasizes a budget approach to building them. 300 photos.

How to Rebuild Small-Block Ford Engines

Author: Tom Monroe
Publisher: Penguin
ISBN: 9780912656892
Category : Transportation
Languages : en
Pages : 170

Book Description
If you have a small-block Ford, then you need this book! This detailed guide covers the step-by-step rebuilding process of the popular small-block Ford engine. Parts inspection, diagnosis, reconditioning, and assembly are outlined in simple text. Hundreds of photos, charts, and diagrams visually walk you through the entire rebuild. You’ll be able to completely disassemble your engine, recondition the block and cylinder heads, then reassemble and install the engine in your vehicle. There’s even a section on how to perform tune-ups to maximize performance and economy. Sections on parts interchanging will help you identify all parts and determine which ones can and can’t be swapped. This is truly a “hands-on” book. Don’t put off your project any longer. Start rebuilding your small-block Ford today!

Ford Total Performance

Author: Martyn L. Schorr
Publisher: Motorbooks International
ISBN: 0760348588
Category : Business & Economics
Languages : en
Pages : 211

Book Description
"An illustrated history of the Ford Motor Company's classic race and street cars, including Cobras and Shelby Mustangs, from 1961 to 1971"--Provided by publisher.