Author: Evan J. Smith Publisher: Penguin ISBN: 1101051280 Category : Transportation Languages : en Pages : 164
Book Description
A guide of more than 35 complete engine buildups offering a wide variety of performance levels for several generations of Ford V8 engine families.
Author: George Reid Publisher: CarTech Inc ISBN: 1884089836 Category : Transportation Languages : en Pages : 130
Book Description
In this definitive guide, the author explains the concept of building a stroker, paying special attention to the effect that increasing the bore and stroke have on the engine as a whole.
Author: Barry Rabotnick Publisher: CarTech Inc ISBN: 1934709158 Category : Transportation Languages : en Pages : 146
Book Description
The Ford FE (Ford Edsel) engine is one of the most popular engines Ford ever produced, and it powered most Ford and Mercury cars and trucks from the late 1950s to the mid-1970s. For many of the later years, FE engines were used primarily in truck applications. However, the FE engine is experiencing a renaissance; it is now popular in high-performance street, strip, muscle cars, and even high-performance trucks. While high-performance build-up principles and techniques are discussed for all engines, author Barry Rabotnick focuses on the max-performance build-up for the most popular engines: the 390 and 428. With the high-performance revival for FE engines, a variety of builds are being performed from stock blocks with mild head and cam work to complete aftermarket engines with aluminum blocks, high-flow heads, and aggressive roller cams. How to Build Max-Performance Ford FE Engines shows you how to select the ideal pistons, connecting rods, and crankshafts to achieve horsepower requirements for all applications. The chapter on blocks discusses the strengths and weaknesses of each particular block considered. The book also examines head, valvetrain, and cam options that are best suited for individual performance goals. Also covered are the best-flowing heads, rocker-arm options, lifters, and pushrods. In addition, this volume covers port sizing, cam lift, and the best rocker-arm geometry. The FE engines are an excellent platform for stroking, and this book provides an insightful, easy-to-follow approach for selecting the right crank, connecting rods, pistons, and making the necessary block modifications. This is the book that Ford FE fans have been looking for.
Author: George Reid Publisher: CarTech Inc ISBN: 1613252285 Category : Transportation Languages : en Pages : 145
Book Description
Since 1991, the popular and highly modifiable Ford 4.6-liter has become a modern-day V-8 phenomenon, powering everything from Ford Mustangs to hand-built hot rods and the 5.4-liter has powered trucks, SUVs, the Shelby GT500, and more. The wildly popular 4.6-liter has created an industry unto itself with a huge supply of aftermarket high-performance parts, machine services, and accessories. Its design delivers exceptional potential, flexibility, and reliability. The 4.6-liter can be built to produce 300 hp up to 2,000 hp, and in turn, it has become a favorite among rebuilders, racers, and high-performance enthusiasts. 4.6-/5.4-Liter Ford Engines: How to Rebuild expertly guides you through each step of rebuilding a 4.6-liter as well as a 5.4-liter engine, providing essential information and insightful detail. This volume delivers the complete nuts-and-bolts rebuild story, so the enthusiast can professionally rebuild an engine at home and achieve the desired performance goals. In addition, it contains a retrospective of the engine family, essential identification information, and component differences between engines made at Romeo and Windsor factories for identifying your engine and selecting the right parts. It also covers how to properly plan a 4.6-/5.4-liter build-up and choose the best equipment for your engine's particular application. As with all Workbench Series books, this book is packed with detailed photos and comprehensive captions, where you are guided step by step through the disassembly, machine work, assembly, start-up, break-in, and tuning procedures for all iterations of the 4.6-/5.4-liter engines, including 2-valve and 3-valve SOHC and the 4-valve DOHC versions. It also includes an easy-to-reference spec chart and suppliers guide so you find the right equipment for your particular build up.
Author: Richard Holdener Publisher: CarTech Inc ISBN: 1932494200 Category : Transportation Languages : en Pages : 210
Book Description
The 4.6- and 5.4-liter modular Ford engines are finally catching up with the legendary 5.0L in terms of aftermarket support and performance parts availability. Having a lot of parts to choose from is great for the enthusiast, but it can also make it harder to figure out what parts and modifications will work best. Building 4.6/5.4L Ford Horsepower on the Dyno takes the guesswork out of modification and parts selection by showing you the types of horsepower and torque gains expected by each modification. Author Richard Holdener uses over 340 photos and 185 back-to-back dyno graphs to show you which parts increase horsepower and torque, and which parts don't deliver on their promises. Unlike sources that only give you peak numbers and gains, Building 4.6/5.4L Ford Horsepower on the Dyno includes complete before-and-after dyno graphs, so you can see where in the RPM range these parts make (or lose) the most horsepower and torque. Holdener covers upgrades for 2-, 3-, and 4-valve modular engines, with chapters on throttle bodies and inlet elbows, intake manifolds, cylinder heads, camshafts, nitrous oxide, supercharging, turbocharging, headers, exhaust systems, and complete engine buildups.
Author: Sean Hyland Publisher: CarTech Inc ISBN: 188408978X Category : Transportation Languages : en Pages : 130
Book Description
Ford's 4.6-liter-powered Mustang is the last remaining "classic" muscle car in the world and is incredibly popular with performance enthusiasts. More than 1,000,000 Mustangs have been built since 1996. Covers all 4.6 and 5.4-liter "Modular" motors--Ford's only V8 engine for Mustangs, fullsize cars, and light trucks from 1996 to 2004.
Author: George Reid Publisher: CarTech Inc ISBN: 1613250487 Category : Transportation Languages : en Pages : 146
Book Description
Ford's 351 Cleveland was designed to be a "mid-sized" V-8 engine, and was developed for higher performance use upon its launch in late 1969 for the 1970 models. The Cleveland engine addressed the major shortcoming of the Windsor engines that preceded it, namely cylinder head air flow. The Windsor engines just couldn't be built at the time to compete effectively with the strongest GM and Mopar small-block offerings, and the Cleveland engine was the answer to that problem. Unfortunately, the Cleveland engine was introduced at the end of Detroit's muscle car era, and the engine, in pure Cleveland form, was very short lived. It did continue on as a low compression passenger car and truck engine in the form of the 351M and 400M, which in their day, offered little in the way of excitement. Renewed enthusiasm in this engine has spawned an influx of top-quality new components that make building or modifying these engines affordable. This new book reviews the history and variations of the 351 Cleveland and Ford's related engines, the 351M and 400M. Basic dimensions and specifications of each engine, along with tips for identifying both design differences and casting numbers are covered. In addition, each engine's strong points and areas of concern are described in detail. Written with high performance in mind, both traditional power tricks and methods to increase efficiency of these specific engines are shared. Also, example builds of 400-, 500-, and even 600-hp engines are highlighted, so you can model your build after any of these powerhouses, depending on your intended use. With the influx of aftermarket parts, especially excellent cylinder heads, the 351 Cleveland as well as the 351M and 400m cousins are now seen as great engines to build. This book will tell you everything you need to know to build a great street or competition engine based in the 351 Cleveland platform.
Author: George Reid Publisher: CarTech Inc ISBN: 1613252129 Category : Transportation Languages : en Pages : 146
Book Description
If there is one thing Ford enthusiasts have learned over the years, deciphering which Ford parts work with which Ford engines is a far more difficult task than with many other engine families. Will Cleveland heads fit on my Windsor block? Can I build a stroker motor with factory parts? Can I gain compression by using older-model cylinder heads, and will it restrict flow? Is there a difference between Windsor 2-barrel and 4-barrel heads? These are just a few examples of common questions Ford fans have. These and many other questions are examined in this all-new update of a perennial best seller. Thoroughly researched and, unlike previous editions, now focused entirely on the small-block Windsor and Cleveland engine families, Ford Small Block Engine Parts Interchange includes critical information on Ford’s greatest small-block engines and goes into great detail on the highly desirable high-performance hardware produced throughout the 1960s, 1970s, and 1980s. By combining some of the best parts from various years, some great performance potential can be unlocked in ways Ford never offered to the general public. Following the advice in Ford Small-Block Engine Parts Interchange, these engine combinations can become reality. You will find valuable information on cranks, blocks, heads, cams, intakes, rods, pistons, and even accessories to guide you through your project. Author George Reid has once again done extensive research to accurately deliver a thorough and complete collection of Ford small-block information in this newly revised edition. Knowing what internal factory engine parts can be used across the wide range of production Ford power plants is invaluable to the hot rodder and swap meet/eBay shopper. Whether building a stroker Cleveland or a hopped-up Windsor, this book is an essential guide.
Author: George McNicholl Publisher: ISBN: 9781610609838 Category : Transportation Languages : en Pages : 198
Book Description
This is a follow-up and companion to the successful How to Build a Flathead Ford V-8. This new edition describes the build-up of a 1946-1948 model 59 engine with a 4-barrel carburetor, a blown French flathead engine, and a blown Ardun engine-designed for street use. Many French flathead engines have been purchased by flathead lovers in the United States. There is a strong demand for those engine blocks, and the purchasers are desperate for any build-up information. The popularity of the Ardun is amazing, and this second volume contains a load of new information about the Ardun, as well as information and photographs of the lastest flathead goodies, such as crankshafts, connecting rods, intake manifolds, and cylinder heads.
Author: Des Hammill Publisher: David and Charles ISBN: 1787115275 Category : Languages : en Pages : 217
Book Description
While many will be familiar with 1960 Ford racing programmes using the very compact pushrod Small Block V8, few know the facts behind the technology employed at Ford during this time. This book gives insight to the confident, logical approach of engineers working at Ford's Engine & Foundry Division. Engineers who made outstanding technical decisions, leading to many major motorsport events being won using larger capacity derivatives of the 1961 221ci Small Block V8 production engine, a power unit introduced by Ford mid-1961 for use in 1962 model year intermediate Fairlanes and Mercurys.
Proudly powered by WordPress |
Theme: Rits Blog by Crimson Themes.
Author: Evan J. Smith
Author: George Reid
Author: Barry Rabotnick
Author: George Reid
Author: Richard Holdener
Author: Sean Hyland
Author: George Reid
Author: George Reid
Author: George McNicholl
Author: Des Hammill