Design of Plated Structures

Author: Darko Beg
Publisher: John Wiley & Sons
ISBN: 3433601151
Category : Technology & Engineering
Languages : en
Pages : 257

Book Description
The main aim of this book is to provide practical advice to designers of plated structures for correct and efficient application of EN 1993-1-5 design rules. In chapter 1 the purpose, the scope and the structure of the book is explained. In chapter 2 a rather detailed and commented overview of EN 1993-1-5 design rules is given following the structure of the standard. Shear lag effect as well as plate buckling problems due to direct stresses, shear forces, transverse forces and interactions of these effects are covered. This chapter also includes a reduced stress method and a finite element analysis approach to plate buckling problems. A large number of design examples illustrate the proper application of individual design rules. Chapter 3 and 4 bring two complete design examples on a crane runway and a box-girder bridge.

Design of Steel Structures to Eurocodes

Author: Ioannis Vayas
Publisher: Springer
ISBN: 3319954741
Category : Technology & Engineering
Languages : en
Pages : 627

Book Description
This textbook describes the rules for the design of steel and composite building structures according to Eurocodes, covering the structure as a whole, as well as the design of individual structural components and connections. It addresses the following topics: the basis of design in the Eurocodes framework; the loads applied to building structures; the load combinations for the various limit states of design and the main steel properties and steel fabrication methods; the models and methods of structural analysis in combination with the structural imperfections and the cross-section classification according to compactness; the cross-section resistances when subjected to axial and shear forces, bending or torsional moments and to combinations of the above; component design and more specifically the design of components sensitive to instability phenomena, such as flexural, torsional and lateral-torsional buckling (a section is devoted to composite beams); the design of connections and joints executed by bolting or welding, including beam to column connections in frame structures; and alternative configurations to be considered during the conceptual design phase for various types of single or multi-storey buildings, and the design of crane supporting beams. In addition, the fabrication and erection procedures, as well as the related quality requirements and the quality control methods are extensively discussed (including the procedures for bolting, welding and surface protection). The book is supplemented by more than fifty numerical examples that explain in detail the appropriate procedures to deal with each particular problem in the design of steel structures in accordance with Eurocodes. The book is an ideal learning resource for students of structural engineering, as well as a valuable reference for practicing engineers who perform designs on basis of Eurocodes.

Structural Steel Design to Eurocode 3 and AISC Specifications

Author: Claudio Bernuzzi
Publisher: John Wiley & Sons
ISBN: 1118631285
Category : Technology & Engineering
Languages : en
Pages : 531

Book Description
Structural Steel Design to Eurocode 3 and AISC Specifications deals with the theory and practical applications of structural steel design in Europe and the USA. The book covers appropriate theoretical and background information, followed by a more design‐oriented coverage focusing on European and United States specifications and practices, allowing the reader to directly compare the approaches and results of both codes. Chapters follow a general plan, covering: A general section covering the relevant topics for the chapter, based on classical theory and recent research developments A detailed section covering design and detailing to Eurocode 3 specification A detailed section covering design and detailing to AISC specifications Fully worked examples are using both codes are presented. With construction companies working in increasingly international environments, engineers are more and more likely to encounter both codes. Written for design engineers and students of civil and structural engineering, this book will help both groups to become conversant with both code systems.

Steel Designers' Manual

Author: SCI (Steel Construction Institute)
Publisher: John Wiley & Sons
ISBN: 1119249864
Category : Technology & Engineering
Languages : en
Pages : 1410

Book Description
In 2010 the then current European national standards for building and construction were replaced by the EN Eurocodes, a set of pan-European model building codes developed by the European Committee for Standardization. The Eurocodes are a series of 10 European Standards (EN 1990 – EN 1999) that provide a common approach for the design of buildings, other civil engineering works and construction products. The design standards embodied in these Eurocodes will be used for all European public works and are set to become the de-facto standard for the private sector in Europe, with probable adoption in many other countries. This classic manual on structural steelwork design was first published in 1955, since when it has sold many tens of thousands of copies worldwide. For the seventh edition of the Steel Designers' Manual all chapters have been comprehensively reviewed, revised to ensure they reflect current approaches and best practice, and brought in to compliance with EN 1993: Design of Steel Structures (the so-called Eurocode 3).

Handbook of International Bridge Engineering

Author: Wai-Fah Chen
Publisher: CRC Press
ISBN: 143981029X
Category : Technology & Engineering
Languages : en
Pages : 1413

Book Description
This comprehensive and up-to-date reference work and resource book covers state-of-the-art and state-of-the-practice for bridge engineering worldwide. Countries covered include Canada and the United States in North America; Argentina and Brazil in South America; Bosnia, Bulgaria, Croatia, Czech Republic, Denmark, Finland, France, Greece, Macedonia, Poland, Russia, Serbia, Slovakia, and Ukraine in the European continent; China, Indonesia, Japan, Chinese Taipei, and Thailand in Asia; and Egypt, Iran, and Turkey in the Middle East. The book examines the use of different materials for each region, including stone, timber, concrete, steel, and composite. It examines various bridge types, including slab, girder, segmental, truss, arch, suspension, and cable-stayed. A color insert illustrates select landmark bridges. It also presents ten benchmark comparisons for highway composite girder design from different countries; the highest bridges; the top 100 longest bridges, and the top 20 longest bridge spans for various bridge types including suspension, cable-stayed, extradosed, arch, girder, movable bridges (vertical lift, swing, and bascule), floating, stress ribbon, and timber; and bridge construction methods.

Design of Steel Structures

Author: Luís Simões da Silva
Publisher: John Wiley & Sons
ISBN: 3433601100
Category : Technology & Engineering
Languages : en
Pages : 391

Book Description
This book introduces the fundamental design concept of Eurocode 3 for current steel structures in building construction, and their practical application. Following a discussion of the basis of design, including the principles of reliability management and the limit state approach, the material standards and their use are detailed. The fundamentals of structural analysis and modeling are presented, followed by the design criteria and approaches for various types of structural members. The theoretical basis and checking procedures are closely tied to the Eurocode requirements. The following chapters expand on the principles and applications of elastic and plastic design, each exemplified by the step-by-step design calculation of a braced steel-framed building and an industrial building, respectively. Besides providing the necessary theoretical concepts for a good understanding, this manual intends to be a supporting tool for the use of practicing engineers. In order of this purpose, throughout the book, numerous worked examples are provided, concerning the analysis of steel structures and the design of elements under several types of actions. These examples will facilitate the acceptance of the code and provide for a smooth transition from earlier national codes to the Eurocode.

Structural Engineer's Pocket Book: Eurocodes

Author: Fiona Cobb
Publisher: CRC Press
ISBN: 1466552085
Category : Technology & Engineering
Languages : en
Pages : 468

Book Description
Functions as a Day-to-Day Resource for Practicing Engineers The hugely useful Structural Engineer's Pocket Book is now overhauled and revised in line with the Eurocodes. It forms a comprehensive pocket reference guide for professional and student structural engineers, especially those taking the IStructE Part 3 exam. With stripped-down basic materi

The Behaviour and Design of Steel Structures to EC3

Author: N.S. Trahair
Publisher: CRC Press
ISBN: 1351990012
Category : Technology & Engineering
Languages : en
Pages : 603

Book Description
The fully revised fourth edition of this successful textbook fills a void which will arise when British designers start using the European steel code EC3 instead of the current steel code BS5950. The principal feature of the forth edition is the discussion of the behaviour of steel structures and the criteria used in design according to the British version of EC3. Thus it serves to bridge the gap which too often occurs when attention is concentrated on methods of analysis and the sizing of structural components. Because emphasis is placed on the development of an understanding of behaviour, many analytical details are either omitted in favour of more descriptive explanations, or are relegated to appendices. The many worked examples both illustrate the behaviour of steel structures and exemplify details of the design process. The Behaviour and Design of Steel Structures to EC3 is a key text for senior undergraduate and graduate students, and an essential reference tool for practising structural engineers in the UK and other countries.

Stability and Ductility of Steel Structures 2019

Author: František Wald
Publisher: CRC Press
ISBN: 1000752240
Category : Technology & Engineering
Languages : en
Pages : 1373

Book Description
For more than forty years the series of International Colloquia on Stability and Ductility of Steel Structures has been supported by the Structural Stability Research Council (SSRC). Its objective is to present the latest results in theoretical, numerical and experimental research in the area of stability and ductility of steel and steel-concrete composite structures. In Stability and Ductility of Steel Structures 2019, the focus is on new concepts and procedures concerning the analysis and design of steel structures and on the background, development and application of rules and recommendations either appearing in recently published Codes or Specifications and in emerging versions, all in anticipation of the new edition of Eurocodes. The series of International Colloquia on Stability and Ductility of Steel Structures started in Paris in 1972, the last five being held in: Timisoara, Romania (1999), Budapest, Hungary (2002), Lisbon, Portugal (2006), Rio de Janeiro, Brazil (2010) and Timisoara, Romania (2016). The 2019 edition of SDSS is organized by the Czech Technical University in Prague.

Design of Structural Elements

Author: Chanakya Arya
Publisher: CRC Press
ISBN: 1482288621
Category : Technology & Engineering
Languages : en
Pages : 518

Book Description
This third edition of a popular textbook is a concise single-volume introduction to the design of structural elements in concrete, steel, timber, masonry, and composites. It provides design principles and guidance in line with both British Standards and Eurocodes, current as of late 2007. Topics discussed include the philosophy of design,