Mechanics of Materials Volume 1

Author: E.J. Hearn
Publisher: Elsevier
ISBN: 0080523994
Category : Technology & Engineering
Languages : en
Pages : 487

Book Description
One of the most important subjects for any student of engineering to master is the behaviour of materials and structures under load. The way in which they react to applied forces, the deflections resulting and the stresses and strains set up in the bodies concerned are all vital considerations when designing a mechanical component such that it will not fail under predicted load during its service lifetime.All the essential elements of a treatment of these topics are contained within this course of study, starting with an introduction to the concepts of stress and strain, shear force and bending moments and moving on to the examination of bending, shear and torsion in elements such as beams, cylinders, shells and springs. A simple treatment of complex stress and complex strain leads to a study of the theories of elastic failure and an introduction to the experimental methods of stress and strain analysis.More advanced topics are dealt with in a companion volume - Mechanics of Materials 2. Each chapter contains a summary of the essential formulae which are developed in the chapter, and a large number of worked examples which progress in level of difficulty as the principles are enlarged upon. In addition, each chapter concludes with an extensive selection of problems for solution by the student, mostly examination questions from professional and academic bodies, which are graded according to difficulty and furnished with answers at the end. * Emphasis on practical learning and applications, rather than theory* Provides the essential formulae for each individual chapter* Contains numerous worked examples and problems

Mechanics of Materials 2

Author: E.J. Hearn
Publisher: Elsevier
ISBN: 0080524001
Category : Technology & Engineering
Languages : en
Pages : 561

Book Description
One of the most important subjects for any student of engineering or materials to master is the behaviour of materials and structures under load. The way in which they react to applied forces, the deflections resulting and the stresses and strains set up in the bodies concerned are all vital considerations when designing a mechanical component such that it will not fail under predicted load during its service lifetime.Building upon the fundamentals established in the introductory volume Mechanics of Materials 1, this book extends the scope of material covered into more complex areas such as unsymmetrical bending, loading and deflection of struts, rings, discs, cylinders plates, diaphragms and thin walled sections. There is a new treatment of the Finite Element Method of analysis, and more advanced topics such as contact and residual stresses, stress concentrations, fatigue, creep and fracture are also covered. Each chapter contains a summary of the essential formulae which are developed in the chapter, and a large number of worked examples which progress in level of difficulty as the principles are enlarged upon. In addition, each chapter concludes with an extensive selection of problems for solution by the student, mostly examination questions from professional and academic bodies, which are graded according to difficulty and furnished with answers at the end.

Non-Linear Mechanics of Materials

Author: Jacques Besson
Publisher: Springer Science & Business Media
ISBN: 9048133564
Category : Science
Languages : en
Pages : 433

Book Description
In mechanical engineering and structural analysis there is a significant gap between the material models currently used by engineers for industry applications and those already available in research laboratories. This is especially apparent with the huge progress of computational possibilities and the corresponding dissemination of numerical tools in engineering practice, which essentially deliver linear solutions. Future improvements of design and life assessment methods necessarily involve non-linear solutions for inelastic responses, in plasticity or viscoplasticity, as well as damage and fracture analyses. The dissemination of knowledge can be improved by software developments, data base completion and generalization, but also by information and training. With such a perspective Non-Linear Mechanics of Materials proposes a knowledge actualization, in order to better understand and use recent material constitutive and damage modeling methods in the context of structural analysis or multiscale material microstructure computations.

Engineering Mechanics 2

Author: Dietmar Gross
Publisher: Springer
ISBN: 3662562723
Category : Science
Languages : en
Pages : 318

Book Description
Now in its second English edition, Mechanics of Materials is the second volume of a three-volume textbook series on Engineering Mechanics. It was written with the intention of presenting to engineering students the basic concepts and principles of mechanics in as simple a form as the subject allows. A second objective of this book is to guide the students in their efforts to solve problems in mechanics in a systematic manner. The simple approach to the theory of mechanics allows for the different educational backgrounds of the students. Another aim of this book is to provide engineering students as well as practising engineers with a basis to help them bridge the gaps between undergraduate studies, advanced courses on mechanics and practical engineering problems. The book contains numerous examples and their solutions. Emphasis is placed upon student participation in solving the problems. The new edition is fully revised and supplemented by additional examples. The contents of the book correspond to the topics normally covered in courses on basic engineering mechanics at universities and colleges. Volume 1 deals with Statics and Volume 3 treats Particle Dynamics and Rigid Body Dynamics. Separate books with exercises and well elaborated solutions are available.

Mechanics of Materials For Dummies

Author: James H. Allen, III
Publisher: John Wiley & Sons
ISBN: 1118089014
Category : Technology & Engineering
Languages : en
Pages : 397

Book Description
Your ticket to excelling in mechanics of materials With roots in physics and mathematics, engineering mechanics is the basis of all the mechanical sciences: civil engineering, materials science and engineering, mechanical engineering, and aeronautical and aerospace engineering. Tracking a typical undergraduate course, Mechanics of Materials For Dummies gives you a thorough introduction to this foundational subject. You'll get clear, plain-English explanations of all the topics covered, including principles of equilibrium, geometric compatibility, and material behavior; stress and its relation to force and movement; strain and its relation to displacement; elasticity and plasticity; fatigue and fracture; failure modes; application to simple engineering structures, and more. Tracks to a course that is a prerequisite for most engineering majors Covers key mechanics concepts, summaries of useful equations, and helpful tips From geometric principles to solving complex equations, Mechanics of Materials For Dummies is an invaluable resource for engineering students!

Mechanics of Solid Materials

Author: Jean Lemaitre
Publisher: Cambridge University Press
ISBN: 9780521477581
Category : Science
Languages : en
Pages : 588

Book Description
Translation of hugely successful book aimed at advanced undergraduates, graduate students and researchers.

Advanced Methods of Continuum Mechanics for Materials and Structures

Author: Konstantin Naumenko
Publisher: Springer
ISBN: 9811009597
Category : Science
Languages : en
Pages : 555

Book Description
This volume presents a collection of contributions on advanced approaches of continuum mechanics, which were written to celebrate the 60th birthday of Prof. Holm Altenbach. The contributions are on topics related to the theoretical foundations for the analysis of rods, shells and three-dimensional solids, formulation of constitutive models for advanced materials, as well as development of new approaches to the modeling of damage and fractures.

Mechanics of Materials

Author: Edwin John Hearn
Publisher: Pergamon
ISBN: 9780080325408
Category : Technology & Engineering
Languages : en
Pages : 914

Book Description

Mechanical Engineers' Handbook, Volume 1

Author: Myer Kutz
Publisher: John Wiley & Sons
ISBN: 1118112822
Category : Technology & Engineering
Languages : en
Pages : 1042

Book Description
Full coverage of materials and mechanical design in engineering Mechanical Engineers' Handbook, Fourth Edition provides a quick guide to specialized areas you may encounter in your work, giving you access to the basics of each and pointing you toward trusted resources for further reading, if needed. The accessible information inside offers discussions, examples, and analyses of the topics covered. This first volume covers materials and mechanical design, giving you accessible and in-depth access to the most common topics you'll encounter in the discipline: carbon and alloy steels, stainless steels, aluminum alloys, copper and copper alloys, titanium alloys for design, nickel and its alloys, magnesium and its alloys, superalloys for design, composite materials, smart materials, electronic materials, viscosity measurement, and much more. Presents comprehensive coverage of materials and mechanical design Offers the option of being purchased as a four-book set or as single books, depending on your needs Comes in a subscription format through the Wiley Online Library and in electronic and custom formats Engineers at all levels of industry, government, or private consulting practice will find Mechanical Engineers' Handbook, Volume 1 a great resource they'll turn to repeatedly as a reference on the basics of materials and mechanical design.

Mechanics of Materials and Interfaces

Author: Chandrakant S. Desai
Publisher: CRC Press
ISBN: 1420041916
Category : Science
Languages : en
Pages : 711

Book Description
The disturbed state concept (DSC) is a unified, constitutive modelling approach for engineering materials that allows for elastic, plastic, and creep strains, microcracking and fracturing, stiffening or healing, all within a single, hierarchical framework. Its capabilities go well beyond other available material models yet lead to significant simpl