Author: George Reid Publisher: CarTech Inc ISBN: 1932494898 Category : Technology & Engineering Languages : en Pages : 146
Book Description
This revised and updated color edition of How to Rebuild the Small-Block Ford walks you step by step through a rebuild, including: planning your rebuild, disassembly and inspection, choosing the right parts, machine work, assembling your engine, and first firing and break-in.
Author: Tom Monroe Publisher: Penguin ISBN: 9780912656892 Category : Transportation Languages : en Pages : 170
Book Description
If you have a small-block Ford, then you need this book! This detailed guide covers the step-by-step rebuilding process of the popular small-block Ford engine. Parts inspection, diagnosis, reconditioning, and assembly are outlined in simple text. Hundreds of photos, charts, and diagrams visually walk you through the entire rebuild. You’ll be able to completely disassemble your engine, recondition the block and cylinder heads, then reassemble and install the engine in your vehicle. There’s even a section on how to perform tune-ups to maximize performance and economy. Sections on parts interchanging will help you identify all parts and determine which ones can and can’t be swapped. This is truly a “hands-on” book. Don’t put off your project any longer. Start rebuilding your small-block Ford today!
Author: George Reid Publisher: CarTech Inc ISBN: 1884089836 Category : Transportation Languages : en Pages : 130
Book Description
In this definitive guide, the author explains the concept of building a stroker, paying special attention to the effect that increasing the bore and stroke have on the engine as a whole.
Author: Tom Monroe Publisher: Penguin ISBN: 9780895860361 Category : Transportation Languages : en Pages : 164
Book Description
If you have one of the 351C, 351M, 400, 429 or 460 Ford V8s, this comprehensive book is a must. It walks you through a complete engine rebuild, step-by-step, with minimum use of special tools. Save money by finding out if your engine really needs rebuilding, or just simple and inexpensive maintenance. Results from diagnosis outlines in this book should be your guide, not the odometer. All rebuilding steps are illustrated from beginning to end. How to inspect parts of damage and wear, and to recondition each part yourself to get the job done right! The most complete source of information identifying major engine parts. Casting numbers, parts description, when a part was used and how it can be interchanged is fully covered in the text, in 20 tables and in 560 photos or drawings. This book will make you an expert!
Author: Charles Morris Publisher: CarTech Inc ISBN: 161325492X Category : Transportation Languages : en Pages : 145
Book Description
Ford was unique in that it had two very different big-block engine designs during the height of the muscle car era. The original FE engine design was pioneered in the late 1950s, primarily as a more powerful replacement for the dated Y-block design. What began as torquey engines meant to move heavyweight sedans morphed into screaming high-performance mills that won Le Mans and drag racing championships throughout the 1960s. By the late 1960s, the FE design was dated, so Ford replaced it with the 385 series, also known as the Lima design, in displacements of 429 and 460 ci, which was similar to the canted-valve Cleveland design being pioneered at the same time. It didn’t share the FE pedigree of racing success, mostly due to timing, but the new design was better in almost every way; it exists via Ford Motorsports’ offerings to this day. Beginning in 1971, the 429 found its way between the fenders of Mustangs and Torinos in high-compression 4-barrel versions called the Cobra Jet and Super Cobra Jet, and they were some of the most powerful passenger car engines Ford had ever built. If the muscle car era had not died out shortly after the release of these powerful engines, without a doubt the 429 performance variants would be ranked with the legendary big-blocks of all time. In this revised edition of How to Rebuild Big-Block Ford Engines, now titled Ford 429/460 Engines: How to Rebuild, Ford expert Charles Morris covers all the procedures, processes, and techniques for rebuilding your 385 Series big-block. Step-by-step text provides details for determining whether your engine actually needs a rebuild, preparation and removal, disassembly, inspection, cleaning, machining and parts selection, reassembly, start-up, and tuning. Also included is a chapter in building the special Boss 429 engines, as well as a bonus chapter on the Ford 351 Cleveland, Ford’s little brother to the big-block.
Author: George Reid Publisher: CarTech Inc ISBN: 1613252285 Category : Transportation Languages : en Pages : 145
Book Description
Since 1991, the popular and highly modifiable Ford 4.6-liter has become a modern-day V-8 phenomenon, powering everything from Ford Mustangs to hand-built hot rods and the 5.4-liter has powered trucks, SUVs, the Shelby GT500, and more. The wildly popular 4.6-liter has created an industry unto itself with a huge supply of aftermarket high-performance parts, machine services, and accessories. Its design delivers exceptional potential, flexibility, and reliability. The 4.6-liter can be built to produce 300 hp up to 2,000 hp, and in turn, it has become a favorite among rebuilders, racers, and high-performance enthusiasts. 4.6-/5.4-Liter Ford Engines: How to Rebuild expertly guides you through each step of rebuilding a 4.6-liter as well as a 5.4-liter engine, providing essential information and insightful detail. This volume delivers the complete nuts-and-bolts rebuild story, so the enthusiast can professionally rebuild an engine at home and achieve the desired performance goals. In addition, it contains a retrospective of the engine family, essential identification information, and component differences between engines made at Romeo and Windsor factories for identifying your engine and selecting the right parts. It also covers how to properly plan a 4.6-/5.4-liter build-up and choose the best equipment for your engine's particular application. As with all Workbench Series books, this book is packed with detailed photos and comprehensive captions, where you are guided step by step through the disassembly, machine work, assembly, start-up, break-in, and tuning procedures for all iterations of the 4.6-/5.4-liter engines, including 2-valve and 3-valve SOHC and the 4-valve DOHC versions. It also includes an easy-to-reference spec chart and suppliers guide so you find the right equipment for your particular build up.
Author: William Burt Publisher: CarTech Inc ISBN: 1932494545 Category : Transportation Languages : en Pages : 146
Book Description
How to Rebuild the Small-Block Mopar is the most comprehensive book on small-block Mopar engines ever released, covering 273, 318, 340, and 360-ci LA engines and 5.2 and 5.9L Magnum V-8s. Author William Burt uses color photos and descriptive text to teach readers the complete rebuild process from removal to break-in.
Author: Barry Rabotnick Publisher: CarTech Inc ISBN: 1613252447 Category : Transportation Languages : en Pages : 145
Book Description
Ford FE engines, which were manufactured from the late 1950s all the way through the mid-1970s, were designated as the large-displacement engines in the Ford lineup. FE means Ford Edsel, and reflects an era when Ford sought to promote the Edsel name. The design of these engines was implemented to increase displacement over its predecessor, the Y-Block engines of the previous decade. Early models were fairly modest in displacement, as were most big-blocks of the era, but they grew quickly to fill the needs of rapidly changing chassis requirements and consumer demand for larger vehicles. As it grew, the FE engine performed admirably as a heavy passenger car and light truck engine. It also became quite accomplished in performance circles, winning the 24 Hours of Le Mans, as well as powering Ford’s muscle car and drag racing programs in the mid- to late 1960s. In this book, you will learn everything you need to know to rebuild one of these legendary engines. CarTech's unique Workbench series format takes you step-by-step through the entire rebuilding process. Covered are engine identification and selection, disassembly, cleaning, parts analysis and assessment, machine shop processes, replacement parts selection, re-assembly and start-up/break-in techniques. Along the way you find helpful tips on performance upgrades, trouble spots to look for, special tools required, and professional builder's tips. FE master, owner of Survival Motorsports, and veteran author Barry Rabotnick shares all of his tricks and secrets on building a durable and reliable FE engine. Whether you are simply rebuilding an old truck for reliable service use, restoring a 100-point show car, or building the foundation for a high-performance street and strip machine, this book will be an irreplaceable resource for all your future FE engine projects.
Author: Matt Cox Publisher: CarTech Inc ISBN: 1613255179 Category : Transportation Languages : en Pages : 161
Book Description
Rebuild and modify your Ford inline six with help from the leading performance builders of these engines, Vintage Inlines! Covering Ford’s small 6-cylinder engine made famous in Falcons, Comets, Mustangs, and many other models from the 1960s and 1970s, this book has everything you need to know from step-by-step rebuilding instructions to performance parts that will set you apart from the rest of the crowd. If this is your first engine build, you’ll be glad to know that every aspect of a complete rebuild is here. Starting with engine removal, you’ll learn all the different steps, including examination, machine work, reassembly, and reinstallation. The mystery is revealed on setting ring gap, checking valve-to-piston clearance, and even degreasing the camshaft for spot-on valve timing! Whether it’s replacing the undersized and outdated 1-barrel carburetor or the original Load-O-Matic distributor, you’ll learn how to get the most from the engine that came as original equipment in literally millions of our favorite Ford vehicles. With the information in this book, you’ll learn how to add a 2-barrel carburetor, electronic ignition, and even a header so you can have the smooth rumble of dual exhaust. Congratulations on your decision to build and modify one of the most popular engines from some of the most popular cars in Ford’s long history with Ford Inline Six: How to Rebuild & Modify!
Author: George Reid Publisher: CarTech Inc ISBN: 1934709824 Category : Technology & Engineering Languages : en Pages : 146
Book Description
In How to Rebuild and Modify Ford C4 and C6 Automatic Transmissions, author George Reid walks readers through the process step-by-step, from removing the transmission, to complete overhaul, to proper re-installation and road testing.
Proudly powered by WordPress |
Theme: Rits Blog by Crimson Themes.
Author: George Reid
Author: Tom Monroe
Author: George Reid
Author: Tom Monroe
Author: Charles Morris
Author: George Reid
Author: William Burt
Author: Barry Rabotnick
Author: Matt Cox
Author: George Reid