Author: Warren EllisPublisher:
ISBN: 9781534308626
Category : Comic books, strips, etc
Languages : en
Pages : 0
Book Description
"Contains materials originally published in single magazine form Injection #1-15."
Advanced Direct Injection Combustion Engine Technologies and Development
Author: H ZhaoPublisher: Elsevier
ISBN: 1845697324
Category : Technology & Engineering
Languages : en
Pages : 325
Book Description
Direct injection enables precise control of the fuel/air mixture so that engines can be tuned for improved power and fuel economy, but ongoing research challenges remain in improving the technology for commercial applications. As fuel prices escalate DI engines are expected to gain in popularity for automotive applications. This important book, in two volumes, reviews the science and technology of different types of DI combustion engines and their fuels. Volume 1 deals with direct injection gasoline and CNG engines, including history and essential principles, approaches to improved fuel economy, design, optimisation, optical techniques and their applications. Reviews key technologies for enhancing direct injection (DI) gasoline engines Examines approaches to improved fuel economy and lower emissions Discusses DI compressed natural gas (CNG) engines and biofuels
Underground Injection Science and Technology
Author: C-F. TsangPublisher: Elsevier
ISBN: 0080457908
Category : Science
Languages : en
Pages : 731
Book Description
Chapters by a distinguished group of international authors on various aspects of Underground Injection Science and Technology are organized into seven sections addressing specific topics of interest. In the first section the chapters focus on the history of deep underground injection as well regulatory issues, future trends and risk analysis. The next section contains ten chapters dealing with well testing and hydrologic modeling. Section 3, consisting of five chapters, addresses various aspects of the chemical processes affecting the fate of the waste in the subsurface environment. Consideration is given here to reactions between the waste and the geologic medium, and reactions that take place within the waste stream itself. The remaining four sections deal with experience relating to injection of, respectively, liquid wastes, liquid radioactive wastes in Russia, slurried solids, and compressed carbon dioxide. Chapters in Section 4, cover a diverse range of other issues concerning the injection of liquid wastes including two that deal with induced seismicity. In Section 5, Russian scientists have contributed several chapters revealing their knowledge and experience of the deep injection disposal of high-level radioactive liquid processing waste. Section 6 consists of five chapters that cover the technology surrounding the injection disposal of waste slurries. Among the materials considered are drilling wastes, bone meal, and biosolids. Finally, four chapters in Section 7 deal with questions relating to carbon dioxide sequestration in deep sedimentary aquifers. This subject is particularly topical as nations grapple with the problem of controlling the buildup of carbon dioxide in the atmosphere. * Comprehensive coverage of the state of the art in underground injection science and technology * Emerging subsurface waste disposal technologies * International scope
Handbook of Metal Injection Molding
Author: Donald F HeaneyPublisher: Woodhead Publishing
ISBN: 0081021534
Category : Technology & Engineering
Languages : en
Pages : 704
Book Description
Metal injection molding combines the most useful characteristics of powder metallurgy and plastic injection molding to facilitate the production of small, complex-shaped metal components with outstanding mechanical properties. Handbook of Metal Injection Molding, Second Edition provides an authoritative guide to this important technology and its applications. Building upon the success of the first edition, this new edition includes the latest developments in the field and expands upon specific processing technologies. Part one discusses the fundamentals of the metal injection molding process with chapters on topics such as component design, important powder characteristics, compound manufacture, tooling design, molding optimization, debinding, and sintering. Part two provides a detailed review of quality issues, including feedstock characterisation, modeling and simulation, methods to qualify a MIM process, common defects and carbon content control. Special metal injection molding processes are the focus of part three, which provides comprehensive coverage of micro components, two material/two color structures, and porous metal techniques, as well as automation of the MIM process and metal injection molding of large components. Finally, part four explores metal injection molding of particular materials, and has been expanded to include super alloys, carbon steels, precious metals, and aluminum. With its distinguished editor and expert team of international contributors, the Handbook of Metal Injection Molding is an essential guide for all those involved in the high-volume manufacture of small precision parts, across a wide range of high-tech industries such as microelectronics, biomedical and aerospace engineering. Provides an authoritative guide to metal injection molding and its applications Discusses the fundamentals of the metal injection molding processes and covers topics such as component design, important powder characteristics, compound manufacture, tooling design, molding optimization, debinding, and sintering Comprehensively examines quality issues such as feedstock characterization, modeling and simulation, common defects and carbon content control
Injection Molding Handbook
Author: D.V. RosatoPublisher: Springer Science & Business Media
ISBN: 1461545978
Category : Technology & Engineering
Languages : en
Pages : 1484
Book Description
This third edition has been written to thoroughly update the coverage of injection molding in the World of Plastics. There have been changes, including extensive additions, to over 50% of the content of the second edition. Many examples are provided of processing different plastics and relating the results to critiCal factors, which range from product design to meeting performance requirements to reducing costs to zero-defect targets. Changes have not been made that concern what is basic to injection molding. However, more basic information has been added concerning present and future developments, resulting in the book being more useful for a long time to come. Detailed explanations and interpretation of individual subjects (more than 1500) are provided, using a total of 914 figures and 209 tables. Throughout the book there is extensive information on problems and solutions as well as extensive cross referencing on its many different subjects. This book represents the ENCYCLOPEDIA on IM, as is evident from its extensive and detailed text that follows from its lengthy Table of CONTENTS and INDEX with over 5200 entries. The worldwide industry encompasses many hundreds of useful plastic-related computer programs. This book lists these programs (ranging from operational training to product design to molding to marketing) and explains them briefly, but no program or series of programs can provide the details obtained and the extent of information contained in this single sourcebook.
Advances in Flow Injection Analysis and Related Techniques
Author: Spas D. KolevPublisher: Elsevier
ISBN: 0444530940
Category : Medical
Languages : en
Pages : 814
Book Description
The concept of flow injection analysis (FIA) was first proposed in 1975 by Ruzicka and Hansen, and this initiated a field of research that would, over more than three decades, involve thousands of researchers, and which has to date resulted in close to 20,000 publications in the international scientific literature. Since its introduction, a number of books, including some specialized monographs, have been published on this subject with the latest in 2000. However, in this decade there has been a number of significant advances in the flow analysis area, and in particular in sequential injection analysis (SIA) techniques, and more recently with the introduction of Lab on a Valve (LOV) and bead injection flow systems. This book aims to cover the most important advances in these new areas, as well as in classical FIA, which still remains the most popular flow analysis technique used in analytical practice. Topics covered in the 23 chapters include the fundamental and underlying principles of flow analysis and associated equipment, the fluid-dynamic theory of FIA, an extensive coverage of detection methods (e.g. atomic and molecular spectrometry, electroanalytical methods). In addition, there are several chapters on on-line separation (e.g. filtration, gas diffusion, dialysis, pervaporation, solvent and membrane extraction, and chromatography), as well as on other sample pretreatment techniques, such as digestion. The book also incorporates several chapters on major areas of application of flow analysis in industrial process monitoring (e.g food and beverages, drugs and pharmaceuticals), environmental and agricultural analysis and life sciences. The contributing authors, who include the founders of flow injection analysis, are all leading experts in flow analytical techniques, and their chapters not only provide a critical review of the current state of this area, but also suggest future trends. Provides a critical review of the current state of and future trends in flow analytical techniques Offers a comprehensive elucidation of the principles and theoretical basis of flow analysis Presents important applications in all major areas of chemical analysis, from food products to environmental concerns
Dependency Injection Principles, Practices, and Patterns
Author: Mark SeemannPublisher: Simon and Schuster
ISBN: 1638357102
Category : Computers
Languages : en
Pages : 911
Book Description
Summary Dependency Injection Principles, Practices, and Patterns teaches you to use DI to reduce hard-coded dependencies between application components. You'll start by learning what DI is and what types of applications will benefit from it. Then, you'll work through concrete scenarios using C# and the .NET framework to implement DI in your own projects. As you dive into the thoroughly-explained examples, you'll develop a foundation you can apply to any of the many DI libraries for .NET and .NET Core. Purchase of the print book includes a free eBook in PDF, Kindle, and ePub formats from Manning Publications. About the Technology Dependency Injection (DI) is a great way to reduce tight coupling between software components. Instead of hard-coding dependencies, such as specifying a database driver, you make those connections through a third party. Central to application frameworks like ASP.NET Core, DI enables you to better manage changes and other complexity in your software. About the Book Dependency Injection Principles, Practices, and Patterns is a revised and expanded edition of the bestselling classic Dependency Injection in .NET. It teaches you DI from the ground up, featuring relevant examples, patterns, and anti-patterns for creating loosely coupled, well-structured applications. The well-annotated code and diagrams use C# examples to illustrate principles that work flawlessly with modern object-oriented languages and DI libraries. What's Inside Refactoring existing code into loosely coupled code DI techniques that work with statically typed OO languages Integration with common .NET frameworks Updated examples illustrating DI in .NET Core About the Reader For intermediate OO developers. About the Authors Mark Seemann is a programmer, software architect, and speaker who has been working with software since 1995, including six years with Microsoft. Steven van Deursen is a seasoned .NET developer and architect, and the author and maintainer of the Simple Injector DI library. Table of Contents PART 1 Putting Dependency Injection on the map The basics of Dependency Injection: What, why, and how Writing tightly coupled code Writing loosely coupled code PART 2 Catalog DI patterns DI anti-patterns Code smells PART 3 Pure DI Application composition Object lifetime Interception Aspect-Oriented Programming by design Tool-based Aspect-Oriented Programming PART 4 DI Containers DI Container introduction The Autofac DI Container The Simple Injector DI Container The Microsoft.Extensions.DependencyInjection DI Container
Atlas of Pain Injection Techniques E-Book
Author: Therese C. O'ConnorPublisher: Elsevier Health Sciences
ISBN: 0702050342
Category : Medical
Languages : en
Pages : 146
Book Description
Here's a highly illustrated practical guide with easy to follow descriptions of pain injection techniques. It will give special advice on how to achieve a successful block and how to avoid and manage potential problems. The techniques will be described in a systematic and easy to use way. Each description of the injection will be accompanied by figures demonstrating the surface anatomy, patient position, needle puncture site and movement of the needle in relation to anatomyh. Where necessary further figures will be used to show dye injections and successful blocks. Uses concise bulleted text with important factors highlighted throughout for ease of understanding and assimilation. Shows how to perform each injection technique step-by-step with comprehensive illustrations (photographs, line drawings, radiologic images) Techniques are grouped together in a logical and easy to follow manner with the same format being used for each block Offers solutions to actual clinical problems and highlights potential pitfalls in both diagnosis and treatment.. Covers a broad scope of clinical practice for use by both beginners and experts.
Split and Splitless Injection for Quantitative Gas Chromatography
Author: Konrad GrobPublisher: John Wiley & Sons
ISBN: 3527612882
Category : Science
Languages : en
Pages : 480
Book Description
This comprehensive and unique handbook of split and splitless injection techniques has been completely revised and updated. This new edition offers: - New insights concerning sample evaporation in the injector - Information about matrix effects - A new chapter on injector design The real processes within the injector are for the first time visualized and explained by the CD-ROM included in the book. Furthermore the reader will understand the concepts of injection techniques and get a knowledge of the sources of error. The handbook also includes many practical guidelines. From reviews of former editions: "This substantial book is on injection techniques alone, which ... demonstrates this can have many pitfalls ... no one should be allowed to direct a laboratory doing quantitative analysis by GC without first being thoroughly familar with this book ..." The Analyst "This is a detailed reference volume filled with practical suggestions and techniques for managing split and splitless injection in the day-to-day world of the working gas chromatographer. It will be useful ... for anyone who must work hands-on with GC." Journal of High Resolution Chromatography
Atlas of Pain Management Injection Techniques
Author: Steven D. WaldmanPublisher:
ISBN:
Category : Medical
Languages : en
Pages : 408
Book Description
Here's the first comprehensive source ever to cover injection techniques for a broad audience of practitioners. This unique color atlas presents the relative values and CPT-4 codes for each procedure along with a practical How-To-Do-It format.
